HOME > CCTV System > Speed Dome > TSC-626D(26x Indoor D&N High Speed Dome Camera)

TSC-626D(26x Indoor D&N High Speed Dome Camera)

Indoor 26x Day&Night
High Speed Dome Camer

Features:

  • Use Original 1/4" SONY EX-View HAD CCD Camera Module (SONY FCB-EX980 series, Day & Night with IR Cut Filter)
  • Day & Night Mode by Auto IR Cut Filter Removal available
  • Offer 26 times Optical Zoom Lens, with 12 times Digital Zoom, Total Zoom Ratio 312x Digital Zoom
  • 6" Ceiling Mount Aluminum Dome Enclosure, Tinted Acrylic Dome Cover, Meet IP33 protection level
  • Optional Heater and Fan to maintain working temperature
  • Quick on/off dome cover for installation& maintenance
  • A stainless steel retaining cable
  • 128 programmable preset positions
  • 4 Programmable Preset Tours, Each Tour with 32 Preset Positions
  • Preset Dwell Time can be adjustable 1 ~ 255 sec.
  • Built-in Memory to store the setting
  • 360° Continuous Pan Rotation, 90° Tilt Scan Range
  • Manual Pan/Tilt Speed : 0.02°~ 180° / sec
  • Recall Speed : 360° /sec.
  • Remote Control Via RS485 Interface
  • Location Feedback OSD (Location Value will be shown on the screen)

Specification:

Model No.
TSC-626DP
TSC-626DN
System

PAL

NTSC
Image Device
1/4" Sony EX-View HAD CCD
Pickup Elements
Approx. 440,000 pixels
Approx. 380,000 pixels
Scanning System
2:1 Interlace, V: 50Hz, H: 15.625KHz
2:1 Interlace, V: 60Hz, H: 15.750KHz
Lens Furnished
26 times Optical Zoom {f = 3.5mm(WIDE) ~ 91mm(TELE) / F1.6 ~ F3.8}
Digital Zoom Ratio
12x (Total Zoom Ratio 312x Digital Zoom)
Angle of View (H)
42.0° (WIDE end) to 1.6° (TELE end)
Minimum Working Distance
320mm (WIDE end) to 1500mm (TELE end)
Minimum Illumination

1.0 Lux, 1/60 sec(NTSC), 1/50 sec (PAL)
0.07 Lux, 1/4 sec(NTSC), 1/3 sec (PAL)
ICR (IR Cut Removable)-ON Mode:
0.15 Lux, 1/60 sec (NTSC), 1/50 sec (PAL)
0.01 Lux, 1/4 sec (NTSC), 1/3 sec (PAL)
Video Output
1 Vp-p Composite Output, 75 ohms
S/N Ratio
More than 50dB
Horizontal Resolution
460 TV Lines (WIDE end)
470 TV Lines (WIDE end)
Electronic shutter speed
1/3 ~ 1/10,000s (20 steps)
1/4 ~ 1/10,000s (20 steps)
Pan Travel
360o Endless Continuous Rotation
Tilt Travel
-10° ~ +90°
Manual Pan/Tilt Speed

0.02° ~ 180° /sec. (8 Level Various speed)
(0.02° / 0.5° / 2° / 8° / 15° / 30° / 60° / 150°)
Recall Speed
360° /sec.
Flip Speed (Pan-180°)
360° / sec.
Preset Positions

128 positions / 4 Preset Tours (Each Tour with 32 preset positions)
(All points can be selected under "Auto Scan" mode)
Motion Tours
1) Tour 2) Auto Scan (between 2 points) 3) Preset 4) Patrol(Various Speed by Setting
Preset Dwell Time

1 ~ 255 sec.(8 Levels)
(2s / 5s / 10s / 30s / 60s / 90s / 120s / 250s)
Camera ID No.
ID Address No.1 ~ No.63 (Can extend up to No. 254)
Sync. System
Internal / Line Lock
Communication
RS485 (2400/4800/9600/19200 Baud Rate)
Control Protocol
Support various brands: Pelco D type (for Standard), Others (Customer Option)
Pan / Tilt control
Step motor x 2 sets (0.0225°/step)
Alarm Input
6 Inputs / Connect to various sensors (Optional)
Alarm Output
2 Outputs / Relay (NC/NO) (Optional)
Power Supply
DC 12V / 1.5A ; AC24V (Optional)
Operating Temperature
-10°C ~ 50°C
Operating Humidity
0% ~ 90%
Heater & Blower
NO(Optional)

• Design and specifications are subject to change without notice


Specifications .pdf